Online Shop
English (Change)
Frequently Asked
Questions
Questions
It is important to us that your questions are answered quickly, so we have created a list of frequently asked questions that may be helpful to you. If you are unable to find an answer to your question, feel free to write us and we will respond as quickly as possible. Your feedback will assist us in continually updating this section to better serve you.
Please select the product with which you need help or enter a search query below:
 |
 |
 |
 |
 |
 |
 |
No, Nero Linux 3 is only designed for Linux operating system so it´s not possible to install Nero Linux 3 on Windows. Currently the following Linux Distributions are supported:
Nero Linux 3 supports all higher versions of the above supported distributions.
- Red Hat Enterprise Linux 4
- SuSE Linux 10.0
- Fedora 4
- Debian GNU/Linux 3.1
- Ubuntu 5.10
Nero Linux 3 supports all higher versions of the above supported distributions.
Ubuntu, SuSE, Red Hat, Nero Linux 3, Nero 9 Lite, Nero 9, Nero 8, Nero 7, Nero 6, Nero 5, Nero, Linux, Installation, Fedora, Distribution, Debian
Was this FAQ helpful to you?
No, it is not possible to unlock Nero Linux 3 with the serial number for NeroLINUX 2. To use Nero Linux 3 you need a new serial number.
Was this FAQ helpful to you?
Nero Linux 3 does not support Lightscribe or Labelflash.
Was this FAQ helpful to you?
Nero Linux 3 is not open source software and the source code of Nero Linux 3 won´t be published.
Was this FAQ helpful to you?
The following remote controls were tested with Nero LiquidTV™:
- Hauppauge PVR 2
- Targa Remote
- MS MCE Remotes
- ATI Remote Wonder™ I
- ATI Remote Wonder™ II
- ATI Remote Wonder™ +
Was this FAQ helpful to you?
Perform the following steps to program your remote to control your TV/stereo:
Step 1:
Go to Remote Control Setup.
From TiVo Central®; select Messages & Settings; then Settings; then Remote Control.
Step 2:
Your TiVo® remote can control the power and volume of both your television and A/V stereo. In addition, it can control the TV INPUT button on some televisions.
To control the power, volume, and mute function on your TV, select Part 1: TV power, volume, and mute.
To control the volume and mute function on your A/V stereo, select Part 2: A/V volume and mute.
To control the power, volume, and mute function on your A/V stereo, return to Part 1, but use the code you selected in Part 2. You should now be able to control the power on your TV and A/V stereo at the same time.
To control the input setting on your TV, select Part 3: TV Input.
Step 3:
Select your Television or A/V stereo brand from the list.
→ Follow the on-screen instructions for each code until you find one that works.
Step 1:
Go to Remote Control Setup.
From TiVo Central®; select Messages & Settings; then Settings; then Remote Control.
Step 2:
Your TiVo® remote can control the power and volume of both your television and A/V stereo. In addition, it can control the TV INPUT button on some televisions.
To control the power, volume, and mute function on your TV, select Part 1: TV power, volume, and mute.
To control the volume and mute function on your A/V stereo, select Part 2: A/V volume and mute.
To control the power, volume, and mute function on your A/V stereo, return to Part 1, but use the code you selected in Part 2. You should now be able to control the power on your TV and A/V stereo at the same time.
To control the input setting on your TV, select Part 3: TV Input.
- If you choose to control both your TV and A/V stereo power simultaneously, the two may occasionally become out of sync (one turns off when the other turns on). To reset, manually turn your TV on or off to match your A/V stereo. You may then use the remote as per usual.
Step 3:
Select your Television or A/V stereo brand from the list.
→ Follow the on-screen instructions for each code until you find one that works.
Was this FAQ helpful to you?
I do not See my Cable Provider Listed. / I Received a 'Choose New Cable/Satellite Provider' Message.
I do not See my Cable Provider Listed
→ This is only valid for use in the UNITED STATES.
If you do not see your cable provider when you run Guided Setup, try selecting the other providers that are listed for your ZIP code to see if any of them have the correct lineup.
If you receive cable service from a small cable provider (such as in an apartment complex, school dorm, or military base), we may need to add a custom listing for you.
Please let us know details about your cable provider is so that we can add it for you.
Quite often, cable companies may use different names. This can happen if a cable company is acquired by another company or if cable service is resold. You may be able to locate the current name of your cable company by looking at a recent bill or other correspondence. If your cable company name is not listed in the Guided Setup, please let us know the name of your cable provider so that we can add it for you.
NOTE: The recording functions of your Nero LiquidTV will not work correctly until you select your correct program provider. If you reported the issue to TiVo®, we will contact you once a lineup has been located for you or if a new one has been added.
To complete Guided Setup you will need to select a temporary lineup. On the Provider Not Listed screen, select "Skip For Now, I’ll Troubleshoot Later".
Next, choose "Yes, continue" on the Are You Sure? screen. Select one of the listed cable providers for temporary use.
I Received a 'Choose New Cable/Satellite Provider' Message
Your Nero LiquidTVTM displays this message if the cable or satellite provider that you selected in Guided Setup is no longer available or if its name has changed.
→ You will need to repeat part of the Guided Setup to select your new provider/lineup (even if your provider has not changed).
Perform the following steps to resolve this error message:
Step 1:
Go to the Channel List screen. Now go to TiVo Central® by pressing the TiVo® button on your remote control. Select Messages & Settings, Settings, Channel, Channel List.
Step 2:
On the Channel List screen, press the INFO or ENTER button (as indicated on the bottom of the screen). You will be taken to the Change Channel Lineups screen. Here, press THUMBS DOWN three times and then the ENTER key to proceed with that part of the Guided Setup.
→ Follow the instructions to select your new lineup.
→ This is only valid for use in the UNITED STATES.
If you do not see your cable provider when you run Guided Setup, try selecting the other providers that are listed for your ZIP code to see if any of them have the correct lineup.
If you receive cable service from a small cable provider (such as in an apartment complex, school dorm, or military base), we may need to add a custom listing for you.
Please let us know details about your cable provider is so that we can add it for you.
Quite often, cable companies may use different names. This can happen if a cable company is acquired by another company or if cable service is resold. You may be able to locate the current name of your cable company by looking at a recent bill or other correspondence. If your cable company name is not listed in the Guided Setup, please let us know the name of your cable provider so that we can add it for you.
NOTE: The recording functions of your Nero LiquidTV will not work correctly until you select your correct program provider. If you reported the issue to TiVo®, we will contact you once a lineup has been located for you or if a new one has been added.
To complete Guided Setup you will need to select a temporary lineup. On the Provider Not Listed screen, select "Skip For Now, I’ll Troubleshoot Later".
Next, choose "Yes, continue" on the Are You Sure? screen. Select one of the listed cable providers for temporary use.
I Received a 'Choose New Cable/Satellite Provider' Message
Your Nero LiquidTVTM displays this message if the cable or satellite provider that you selected in Guided Setup is no longer available or if its name has changed.
→ You will need to repeat part of the Guided Setup to select your new provider/lineup (even if your provider has not changed).
Perform the following steps to resolve this error message:
Step 1:
Go to the Channel List screen. Now go to TiVo Central® by pressing the TiVo® button on your remote control. Select Messages & Settings, Settings, Channel, Channel List.
Step 2:
On the Channel List screen, press the INFO or ENTER button (as indicated on the bottom of the screen). You will be taken to the Change Channel Lineups screen. Here, press THUMBS DOWN three times and then the ENTER key to proceed with that part of the Guided Setup.
→ Follow the instructions to select your new lineup.
Was this FAQ helpful to you?
Perform the following steps if the Video Hookup screen does not find a video signal:
Step 1:
Verify that your cable or satellite set-top box is turned on.
Step 2:
Disconnect the cable that is connected to the video input of the TV tuner stick / TV tuner card and connect it directly to the video input of your TV. Do you see a video signal?
→ Yes, I see a video signal. This confirms that the set-top box is sending a signal and that this video cable is working. Reconnect this video cable to the video input of the TV tuner stick / TV tuner card.
→ No, I do not see a video signal. If your cable or satellite box does not send a video signal to the TV, there may be a problem with the video cable or with the set-top box. Try replacing the video cable that connects the set-top box to the TV. If you see a video signal with a different video cable, use this new cable to connect the set-top box to the video input of your TV tuner stick / TV tuner card. If you do not see a video signal with any video cable, contact your cable or satellite provider for help.
Step 1:
Verify that your cable or satellite set-top box is turned on.
Step 2:
Disconnect the cable that is connected to the video input of the TV tuner stick / TV tuner card and connect it directly to the video input of your TV. Do you see a video signal?
→ Yes, I see a video signal. This confirms that the set-top box is sending a signal and that this video cable is working. Reconnect this video cable to the video input of the TV tuner stick / TV tuner card.
→ No, I do not see a video signal. If your cable or satellite box does not send a video signal to the TV, there may be a problem with the video cable or with the set-top box. Try replacing the video cable that connects the set-top box to the TV. If you see a video signal with a different video cable, use this new cable to connect the set-top box to the video input of your TV tuner stick / TV tuner card. If you do not see a video signal with any video cable, contact your cable or satellite provider for help.
Was this FAQ helpful to you?
