Online Shop
English (Change)
FAQ
It is important to us that your questions are answered quickly, so we have created a list of frequently asked questions that may be helpful to you. If you are unable to find an answer to your question, feel free to write us and we will respond as quickly as possible. Your feedback will assist us in continually updating this section to better serve you.
Enter a search query:
Category: LiquidTV
The following remote controls were tested with Nero LiquidTV™:
- Hauppauge PVR 2
- Targa Remote
- MS MCE Remotes
- ATI Remote Wonder™ I
- ATI Remote Wonder™ II
- ATI Remote Wonder™ +
Was this FAQ helpful to you?
Perform the following steps to program your remote to control your TV/stereo:
Step 1:
Go to Remote Control Setup.
From TiVo Central®; select Messages & Settings; then Settings; then Remote Control.
Step 2:
Your TiVo® remote can control the power and volume of both your television and A/V stereo. In addition, it can control the TV INPUT button on some televisions.
To control the power, volume, and mute function on your TV, select Part 1: TV power, volume, and mute.
To control the volume and mute function on your A/V stereo, select Part 2: A/V volume and mute.
To control the power, volume, and mute function on your A/V stereo, return to Part 1, but use the code you selected in Part 2. You should now be able to control the power on your TV and A/V stereo at the same time.
To control the input setting on your TV, select Part 3: TV Input.
Step 3:
Select your Television or A/V stereo brand from the list.
→ Follow the on-screen instructions for each code until you find one that works.
Step 1:
Go to Remote Control Setup.
From TiVo Central®; select Messages & Settings; then Settings; then Remote Control.
Step 2:
Your TiVo® remote can control the power and volume of both your television and A/V stereo. In addition, it can control the TV INPUT button on some televisions.
To control the power, volume, and mute function on your TV, select Part 1: TV power, volume, and mute.
To control the volume and mute function on your A/V stereo, select Part 2: A/V volume and mute.
To control the power, volume, and mute function on your A/V stereo, return to Part 1, but use the code you selected in Part 2. You should now be able to control the power on your TV and A/V stereo at the same time.
To control the input setting on your TV, select Part 3: TV Input.
- If you choose to control both your TV and A/V stereo power simultaneously, the two may occasionally become out of sync (one turns off when the other turns on). To reset, manually turn your TV on or off to match your A/V stereo. You may then use the remote as per usual.
Step 3:
Select your Television or A/V stereo brand from the list.
→ Follow the on-screen instructions for each code until you find one that works.
Was this FAQ helpful to you?
- Check that you have entered a MAK (Media access key) in Settings → Media Access Key. The MAK has to be the same on all TiVo DVRs and LiquidTV™ PCs on your local network which you want to have access to.
- There is something wrong with the remote DVR. Check the connection.
Was this FAQ helpful to you?
Please make sure that you know the IP address and port of your proxy server. Please set up the proxy for LiquidTV and Internet Explorer.
Set up proxy in LiquidTV
1. Install LiquidTV
2. Navigate to the NLTV installation folder (usually "C:\Program Files\Nero\Nero LiquidTV") and start "NTProxy.exe"
3. Enter the IP address and port of the proxy, click on "Apply changes" and then "Close"
4. Restart the PC
Set up proxy in Internet Explorer
1. Open "Internet Options" located under Start => Control Panel
2. On the "Connections" tab, click on "LAN settings"
3. Check "Use a proxy server for your LAN..."
4. Under "Address" and "Port", enter the IP address and port of the proxy server
Set up proxy in LiquidTV
1. Install LiquidTV
2. Navigate to the NLTV installation folder (usually "C:\Program Files\Nero\Nero LiquidTV") and start "NTProxy.exe"
3. Enter the IP address and port of the proxy, click on "Apply changes" and then "Close"
4. Restart the PC
Set up proxy in Internet Explorer
1. Open "Internet Options" located under Start => Control Panel
2. On the "Connections" tab, click on "LAN settings"
3. Check "Use a proxy server for your LAN..."
4. Under "Address" and "Port", enter the IP address and port of the proxy server
Was this FAQ helpful to you?
Unfortunately, we cannot currently provide Nero LiquidTV™ support for Microsoft IR blasters in Windows Vista or Windows 7.
Was this FAQ helpful to you?
Some versions of the Silicondust device driver software (e.g. 20090415) include a bug that prevents the Silicondust device from working properly with Nero LiquidTV™. However, other versions work well with Nero LiquidTV™ (e.g. 20081231 or 20090617beta1). Please use a version of the Silicondust device driver software that is compatible with Nero LiquidTV™.
Was this FAQ helpful to you?